50 skids without a spanner: How Jamie Cairney’s eight-week build BIG PAPA is taking the burnout pad by storm

Now, after a massive year of burnout results, the Tapitallee local is taking BIG PAPA to the Castlemaine Rod Shop Invitational for a crack at another win. There’s a pretty simple way Jamie Cairney measures how good his Torana has been: he’s managed to get around 50 skids out of it without having to put a spanner on the thing. Not bad for a blown burnout car that went from a bare shell to the pad in about eight weeks.

BIG PAPA is a 1978 Holden Torana SL/R running a blown 383ci Holden engine on methanol. It’s a dedicated burnout car now, but that wasn’t always the plan.

Jamie originally bought the Torana from his uncle, who had been sitting on it for eight or nine years. It already had a blown combination but was unfinished and unpainted. Jamie knocked it back a couple of times before eventually deciding to buy it around this time last year.

At first, he was going to turn it into a street car and keep skidding his VY SS ute.

After Jamie moved the blown combination into the VY from an earlier HQ ute, it was his main burnout car for six or seven years. It was also a bit of a family car, having originally been bought brand new by his parents in 2003. It was the car he learned to drive in, too.

But after spending good money getting it painted and freshened up for the Castlemaine Rod Shop Invitational last year, Jamie blew it up and the ute caught fire, burning the rear of the car.

That was enough to change direction.

“I was just like, bugger this,” he says. “With plastic cars, you’re always fixing them.”

On the drive home, his mate MR LOO5E, who skids the gold HQ, talked him into putting everything into the Torana instead.

And the rest happened in a hurry.

Jamie stripped the car back, pulled the engine out and started working through what needed changing to fit the new combination. He estimates he did around 90% of the work himself, with help from a close crew who made sure the car kept moving between workshops.

Wildfab sorted the rear end, Shane from Auto Fabrication HQ handled the wiring and finishing touches, Troy at Allspeed built the engine, and Fig Tree Automatics looked after the gearbox. Black Widow took care of the paint, while Pat from Aeroflow helped out with parts.

Jamie was even in Fiji for part of the build, with MR LOO5E helping to coordinate the work and move the car between workshops.

The whole thing took about eight weeks, with much of the work happening over Christmas. Once the car came back from the painter, Wildfab had it for around three weeks before it went to Shane for wiring.

There was just enough time for a test skid in Shane’s driveway before Jamie brought it home to finish the rest.

He was still putting the car together late on the Wednesday night before Summernats, working until around midnight before taking it out on the pad the following day.

It was a pretty big ask, but BIG PAPA was about to prove it was more than just a rushed build.

There was a small issue to sort after Summernats. The rear end still had rubber bushes, which allowed the diff to move under acceleration and sent the car offline.

Jamie took it back to Wildfab, where they solid-mounted and heim-jointed the rear end. Once that was sorted, the car started going straight.

Since then, he’s been on a pretty serious run.

There was a second place at ROSS, a Good Friday win, second at Rockynats, a win at Powercruise on the Mountain and another second at Brashernats. He also took BIG PAPA all the way to Cairns for Northern Nats, where he finished around fifth or sixth.

Powercruise on the Mountain was a particularly busy week, with around nine full skids in six days, plus extra runs and plenty of tyre changes.

By the time it was over, the Torana was looking a little worse for wear. Mason Rumble from Exile Panel and Paint is now giving it a tidy-up and fresh paint before the next trip.

The engine is also getting some attention. Jamie says the bottom end is still healthy, but the top end is due for a freshen-up after the engine regularly saw between 8,300 and 8,500 rpm. Troy at Allspeed is sorting the lifters ahead of the Invitational.

Considering how hard the car has been worked, Jamie is pretty happy with how little it has asked of him.

“I’ve done a year and 50 skids until I’ve had to touch it,” he says.

His routine between events has been fairly simple: load it into the trailer, park it beside the shed and pull it out when the next competition rolls around. Give it a wash, change the oil and get back to it.

Jamie reckons it’s been one of the most reliable cars he’s had, which is handy when the calendar is as busy as his has been.

Now the next job is getting it ready for the Castlemaine Rod Shop Invitational 3.

Jamie has skidded at Victorian Motorsports Park once before, but is keen to see the work that’s gone into refreshing the venue. The trip from Tapitallee will take around seven or eight hours, and he’ll be heading down with a few familiar faces, including Dom Lucci and Kane Grace.

Getting an invitation is something he’s pretty pleased about, too. With 50 of the country’s top burnout cars on the list, it’s a serious field.

“When you start, that’s what you want to be. You want to be top 10 everywhere,” he says. “And then to be invited to the Rod Shop Invitational, that’s top 50 in Australia. Obviously very happy about that.”

He’s not going to pretend he’s just there for a weekend away, either.

“Everyone tells you they do it for fun and this and that. Like, 100%, that is the main aspect, but you want to win,” Jamie says.

A win would be a pretty handy way to finish the year, although Jamie says he’d be just as happy to see one of his mates take it out or come away with a top-three finish.

There’ll be a barbecue and a few beers after the event, too, giving everyone a chance to catch up with the competitors they’ve met along the way. That social side is a big part of it for Jamie, particularly when people from different states and burnout crews get together.

There might be one more Sydney event before Christmas, mainly to give BIG PAPA another run and make sure it’s ready for Summernats. But the main focus is the Rod Shop Invitational.

After a year of wins, podiums and plenty of tyre smoke, Jamie is hoping to add one more result to the list.

And if the Torana can keep doing what it’s done so far, he might even make it through another 50 skids before it needs a proper look-over.

EVENT DETAILS 

Castlemaine Rod Shop Invitational 3

Saturday 21 November 2026 

https://proburnouts.com.au/events/rod-shop-invitational

Tickets are on sale HERE